Linear Stepper Motors
Nippon Pulse’s linear stepper series provides a simple motion system at a fraction of the cost of conventional rotary stepper motors and traditional linear motion systems. Our LINEARSTEP® series are permanent magnet type stepper motors that enable linear motions without the need for external transformers. The LINEARSTEP® series offers a wide range of customizable options, including various screw pitches, screw lengths, bipolar or unipolar windings, and several operating voltages.
Because of its ball bearing support and strong motor case, the LINEARSTEP® series provides you with durability and a long operating life. With an enhanced Neodymium rotor magnet, the LINEARSTEP® series also offers a large driving force, up to 39.5N at 200pps. These linear motors can be controlled and driven by the same electronics used for rotary stepper motors.
LINEARSTEP® motors offer direct linear motion without any mechanical transformers and therefore allow you to design a simple system at a fraction of the cost of conventional rotary stepper motors. The PFL, PFCL series offers the design engineer the ultimate in flexibility to match the applications requirements.
- Offered in diameters of 25mm and 35mm
- Can also be ordered with one of three thread pitches on the lead screw (0.48mm, 0.96mm, and 1.2mm)
Unipolar or bipolar windings with a variety of useable voltages
- 30mm and 60mm effective stroke lengths
- 12V and 5V coil ratings
- 24 or 48 steps per revolution
- Forces between 8N and 39.5N (at 200pps)
- Travel per step between 0.01mm and 0.05mm
- Step angles of 7.5° and 15°
- Rated current between 0.10A/F and 0.42A/F
Based on modified hybrid stepping motors, ElectroCraft AxialPower Plus motors are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8° step. The reliability and precision of our AxialPower Plus and L3 motors come from using only the highest quality parts. We use stainless steel to increase the durability of our actuating leadscrews. And our internal rotating nuts are made from a range of engineered polymers for low-friction, smooth operation. For applications needing a little more force, try our L3 linear actuators.
Click on the models below for pricing & specifications.