PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
DPCANIR-015A400 -RESOLVER FEEDBACK - CANopen Input Sinusoidal Brushless Servo Amplifiers
DPCANIR-015A400 -RESOLVER FEEDBACK
CANopen Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $1,176.00/ea
Model GM9236S024 - Brush Mini Gearmotor, Economical
Model GM9236S024
Brush Mini Gearmotor, Economical
Pittman
From: $160.00/ea
RCM3300 Series - Core Modules
RCM3300 Series
Core Modules
Rabbit Semiconductor/Z-World
From: $97.00/ea

DMC-1200

PC/104 BUS Motion Controllers

1 - 8 Axes PC/104 Optima Series Motion Controller

DMC-1200 - PC/104 BUS Motion Controllers
from $1,095.00/ea

The DMC-1200 for the PC/104 bus is a member of the Optima Series, Galil's latest generation of multi-axis motion controllers. Designed to fit in an embedded PC/104 system, the DMC-1200 controllers accommodate 1- through 8-axis formats and allow control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, electronic gearing and ecam. Programming the DMC-1200 is simplified with two-letter, intuitive commands and a full set of software tools such as WSDK for servo tuning and analysis, ActiveX Tool Kit for Visual Basic users and a C-Programmers Tool Kit. Unlike other members of the Optima family, the DMC-1200 series does not provide opto-isolated inputs.

Product Availability:
Custom Order: Ships in 1-2 Weeks
(Expedited Airfreight Option Available For Sooner Delivery)

Features of PC/104 BUS Motion Controllers

  • Accepts up to 12 MHz encoder frequencies for servos and 3 MHz for steppers
  • Advanced PID compensation with Velocity and Acceleration feedforward, integration limits, notch filter and low-pass filter. Sample times to 62.5 microseconds per axis
  • Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, electronic gearing and ECAM
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays
  • Dual encoders, home input and forward and reverse limits accepted for every axis
  • 8 uncommitted inputs and 8 outputs for 1- through 4-axes models, 16 inputs and 16 outputs for 5- through 8-axis models
  • 8 uncomitted analog inputs
  • Expansion option for 64 configurable I/O with DB-1264 attachment
  • High speed position latch and output compare
  • Sinusoidal commutation for brushless servo motors
  • High-density shielded cables for noise immunity. CE certified.
  • Custom hardware and firmware options available
  • Ceramic Motor Option allows precise control for all Ceramic Motors

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
PC/104 Bus 1-axis
DMC-1210
 1,095.00  1,095.00  1,045.00
Opto isolation for 64 I/O
IOM-1964
 695.00  695.00  645.00
ICM for auxiliary encoders
ICM-2908
 125.00  125.00  120.00
ICM with opto outputs
ICM-2900-OPTO
 345.00  345.00  325.00
ICM with opto & flange
ICM-2900-FL-OPTO
 345.00  345.00  325.00
ICM with flange mount
ICM-2900-FL
 295.00  295.00  270.00
Interconnect for DMC-2xx0
ICM-2900
 295.00  295.00  270.00
ICM with isolated ouputs
ICM-1900-OPTO
 395.00  395.00  370.00
Interconnect for 4 axis
ICM-1900
 345.00  345.00  325.00
16-bit analog-to-digital
-16 bit ADC for analog inputs
 100.00  100.00  95.00
Shunt regulator for AMP-195x0
-SR for AMP-195x4
 50.00  50.00  44.00
FEMALE PC BOARD MOUNT CONNECTOR
100-PIN SCSI
 25.00  25.00  25.00
1-axis servo amp
AMP-1910
 695.00  695.00  660.00
2-axis servo amp
AMP-1920
 1,045.00  1,045.00  995.00
3-axis servo amp
AMP-1930
 1,395.00  1,395.00  1,325.00
4-axis servo amp
AMP-1940
 1,745.00  1,745.00  1,655.00
ICM with two 500W servo drives
AMP-19520
 595.00  595.00  565.00
ICM with four 500W servo drives
AMP-19540
 795.00  795.00  765.00
100-pin cable; 1 meter
CABLE - 100 - 1m
 175.00  175.00  170.00
100-pin cable; 2 meter
CABLE - 100 - 2m
 190.00  190.00  185.00
100-pin cable; 4 meter
CABLE - 100 - 4m
 210.00  210.00  205.00
Auxiliary encoder cable;1 meter
CABLE - 36 - 1m
 90.00  90.00  85.00
Auxiliary encoder cable;3 meter
CABLE - 36 - 3m
 110.00  110.00  105.00
Extended I/O cable; 1 meter
CABLE - 80 - 1m
 135.00  135.00  130.00
Extended I/O cable; 4 meter
CABLE - 80 - 4m
 160.00  160.00  155.00
20-pin to 25-pin (aux enc)
CB-20-25
 15.00  15.00  15.00
26-pin to 25 pin (aux enc)
CB-26-25
 15.00  15.00  15.00
36-pin to 25 pin (aux enc)
CB-36-25
 50.00  50.00  49.00
50-pin to 100-pin (5 thru 8 axes)
CB-50-100
 75.00  75.00  70.00
50-pin to 100-pin (DMC-1200)
CB-50-100-1200
 75.00  75.00  70.00
50-pin to 80-pin (Ext. I/O)
CB-50-80
 75.00  75.00  70.00
64 I/O expansion board
DB-12064
 395.00  395.00  358.00
64 I/O expansion board
DB-14064
 295.00  295.00  280.00
PC/104 Bus 2-axis
DMC-1220
 1,495.00  1,495.00  1,420.00
PC/104 Bus 3-axis
DMC-1230
 1,895.00  1,895.00  1,800.00
PC/104 Bus 4-axis
DMC-1240
 2,195.00  2,195.00  2,085.00
PC/104 Bus 5-axis
DMC-1250
 2,595.00  2,595.00  2,465.00
PC/104 Bus 6-axis
DMC-1260
 2,795.00  2,795.00  2,655.00
PC/104 Bus 7-axis
DMC-1270
 2,995.00  2,995.00  2,845.00
PC/104 Bus 8-axis
DMC-1280
 3,195.00  3,195.00  3,035.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
 External Links to Downloadable Files:
-Spec Sheet
http://www.galil.com/download/datasheet/ds_12x0_17x0_18x0.pdf
-Bulletin Board
http://www.galilmc.com/forum
-Application Notes
http://www.galilmc.com/learn/application-notes

" Good afternoon Marilena,   We have received the part and everything is working fine. I just would..."

-Carmen P., University of Houston

Add Your Comment  |  Read More Comments

"Thanks. It's always nice to get a quick turnaround on the quotes."

-Robert W., NRC

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism