PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
Model 8322S002 New Partnumber 8222S002 - Brush Mini Motors, Economical
Model 8322S002 New Partnumber 8222S002
Brush Mini Motors, Economical
Pittman
From: $87.00/ea
Model S16A8 - Analog Input Sinusoidal Brushless Servo Amplifiers
Model S16A8
Analog Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $425.00/ea
Production Panel Meter  - Marquees
Production Panel Meter
Marquees
Exor Electronic R&D
From: $512.00/ea

Model 2035XD

Drivers with Oscillators

Dual axis 2.0A @ 35VDC output Full/Half Step Drive with Oscillator

Model 2035XD - Drivers with Oscillators
from $276.00/ea

The 2035XD step motor driver is a two axis, software configured step/direction or oscillator drive. Drives can be quickly and precisely configured using our eXposition software and a Windows PC. When configured for pulse/direction mode, the two drives can be commanded by the step and direction signals available from many PLCs and step motor indexers. In oscillator mode, the two drives generate their own acceleration and deceleration profiles and are commanded by digital run/stop signals. These signals can be supplied by PLCs, mechanical switches, single board computers or other motion control devices. Speeds may be fixed or can be set "on the fly" by 0 to 5 volt analog signals.

Product Availability:
Usually In Stock: Ships in 5-7 Days
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Drivers with Oscillators

  • DC bus voltage 12-35 VDC motor supply (including ripple)
  • Software programmable motor current, 0.1-2.0 amps/phase
  • Software programmable step size, 200-50800 steps/rev
  • Automatic idle current reduction
  • Four optically isolated digital inputs: step/run 1, step/run 2, direction 1, direction 2
  • Two analog inputs, 10 bit resolution, 0 - 5VDC
  • On-board oscillator generates step pulses and accel/decel ramps
  • Fixed speed or proportional to analog input
  • Optically isolated 5-24 VDC Tach output for monitoring speed
  • 70 watts of usable power per axis
  • Screw terminal connectors
  • Dual H-bridge, inaudible PWM amplifier
  • 3 state, pulse width modulated current control, switching at 20-30 KHz
  • Drives 4, 6 or 8 lead size 11, 14, 17 or 23 step motors

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
Dual axis Full/Half Step Drive with Oscillator
2035XD
 276.00  276.00  270.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
Spec Sheet
Download Size: 98.36 kb
User Manual
Download Size: 149.43 kb
White Paper: Recommended Step Motor & Drive Combinations
Download Size: 42.37 kb
 External Links to Downloadable Files:
-Complete Catalog
http://www.applied-motion.com/sites/default/files/pdf/2008_Catalog.pdf

"Thank you for all of your support over the past year."

-Dave R., LAI

Add Your Comment  |  Read More Comments

"It took me quite a while to solve this problem (using your recommendations). Anyway, so far so good, and thank you..."

-BJ S., Hinze Auto.

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism