PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
Model GM8724S023 New Partnumber GM8224S023 - Brush Mini Gearmotor/Encoders, Economical
Model GM8724S023 New Partnumber GM8224S023
Brush Mini Gearmotor/Encoders, Economical
Pittman
From: $272.00/ea
SAB Series - Spring Applied Brakes
SAB Series
Spring Applied Brakes
Inertia Dynamics
From: $213.00/ea
Model ID33004 - NEMA Frame Brush Servo Motors
Model ID33004
NEMA Frame Brush Servo Motors
MCG Inc.
From: $375.00/ea

Model ST5

Microstep Driver with Indexer

0.5-5.0A @ 24-48VDC output

Model ST5 - Microstep Driver with Indexer
from $289.00/ea

S Version features include:

  • Basic drive, analog, digital and host command input.
  • Pulse & directio with electronic gearing
  • Encoder following with electronic gearing
  • CW and CCW pulse
  • Velocity (oscillator) mode
  • Multi-axis Si programming if used with the SiNet hub.
  • SCL "host" commands for real time control from a host PC or PLC (RS-232 or RS-485)

Q Version features include:

  • Q is a high level ASCII command set and programming language. Sequences of commands can be stored in the drive to provide complex motion and machine control.
  • Flow controls, Motion, I/O, Math functions, Registration manipulation, Multi-tasking, Host iterrogation, Exception handling (faults &interrupts).
  • Q drives also support these functions, which can be changed "on the fly" from a host command or within a Q program:
  • Pulse & direction with electronic gearing, Encoder folling with electronic gearing, CW & CCW pulse, analog or digital velocity (oscillator & joystick) mode. Analog positioning.
  • Options: Encoder feedback, RS-483 communication

Si Version features include:

  • Stand-alone operation
  • Si Programmer Windows Software with integrated configuration (software & programming cable included).
  • Graphical point and click format.
  • Combines motion, I/O, exception handling and operator interface functionality for simple machine sequencing.
  • Easily intregrates with other devices on the machine (Sensors, PLCs etc).

The ST5-IP-EN incorporates EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The ST-IP drives run all of the same control modes as ST-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming.

For connecting to external devices such as control signals, incremental encoders, limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 8 digital inputs, 4 digital outputs, and 2 single-ended analog inputs (analog inputs can be wired together as 1 differential analog input). Adjustable digital filters are present on the digital inputs for enhanced reliability in noisy environments.

In addition to EtherNet/IP the drive supports Ethernet TCP and UDP protocols for sending commands from Applied Motion’s proprietary Serial Command Language (SCL). The same 10/100 Mbit Ethernet port on the drive is also used for configuring and programming the drive using the ST Configurator™ Ethernet and Q Programmer™ software applications, respectively.

Product Availability:
In Stock: Ships in 1-2 Days
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Microstep Driver with Indexer

  • Current Output 0.5 to 5.0 A
  • 24-48VDC Input
  • ConfiguratorTM configuration software
  • Configurable Idle Current reduction
  • Electronic Dampening
  • Torque Ripple Smooth
  • Command Signal Smooth
  • Host command via RS232/485
  • Anti-Resonance
  • Idle torque reduction
  • EtherNet/IP Compatible

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
S Model, Microstep Driver, RS-232
ST5-S
 289.00  289.00  281.00
Microstep Driver with ASCII Programming
ST5-C-CE
 556.00  556.00  544.00
Microstep Driver with ASCII Programming
ST5-C-CN
 514.00  514.00  503.00
Microstep Driver with ASCII Programming
ST5-IP-EE
 622.00  622.00  609.00
Microstep Driver with ASCII Programming
ST5-IP-EN
 577.00  577.00  565.00
Microstep Driver with ASCII Programming
ST5-Plus
 329.00  329.00  322.00
Microstep Driver with ASCII Programming
ST5-Q-EE
 583.00  583.00  571.00
Microstep Driver with ASCII Programming
ST5-Q-EN
 536.00  536.00  525.00
Q Model, Microstep Driver with ASCII Programming, RS-232, Encoder Feedback
ST5-Q-NE
 513.00  513.00  502.00
Q Model, Microstep Driver with ASCII Programming, RS-232, No Encoder Feedback
ST5-Q-NN
 444.00  444.00  434.00
Q Model, Microstep Driver with ASCII Programming, RS-232, RS-485, Encoder Feedback
ST5-Q-RE
 594.00  594.00  581.00
Q Model, Microstep Driver with ASCII Programming, RS-232, RS-485, No Encoder Feedback
ST5-Q-RN
 541.00  541.00  530.00
Si Model, Microstep Driver with Graphical Programming, RS-232, Encoder Feedback
ST5-Si-NE
 550.00  550.00  538.00
Si Model, Microstep Driver with Graphical Programming, RS-232, No Encoder Feedback
ST5-Si-NN
 465.00  465.00  456.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
User Manual
Download Size: 3,670.14 kb
 External Links to Downloadable Files:
-Complete Catalog
http://www.applied-motion.com/sites/default/files/pdf/2008_Catalog.pdf
-Spec Sheet
http://www.applied-motion.com/sites/default/files/ST_Datasheet_925-0007.pdf

"It took me quite a while to solve this problem (using your recommendations). Anyway, so far so good, and thank you..."

-BJ S., Hinze Auto.

Add Your Comment  |  Read More Comments

"I would like to thank you personally for the excellent service hand delivering the remaining motors & gearboxes. You..."

-Dave G., G.E.

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism