PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
DPCANIE-030A400 -ENCODER FEEDBACK - CANopen Input Sinusoidal Brushless Servo Amplifiers
DPCANIE-030A400 -ENCODER FEEDBACK
CANopen Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $1,229.00/ea
Model GM9236S012 - Brush Mini Gearmotor, Economical
Model GM9236S012
Brush Mini Gearmotor, Economical
Pittman
From: $154.00/ea
Model ZBH12A8 - Analog Input Trapezoidal Brushless Servo Amplifiers
Model ZBH12A8
Analog Input Trapezoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $205.00/ea

Model ST10

Microstep Driver with Indexer

0.5-10.0A @ 24-80VDC output

Model ST10 - Microstep Driver with Indexer
from $385.00/ea

S Version features include:

  • Basic drive, analog, digital and host command input.
  • Pulse & directio with electronic gearing
  • Encoder following with electronic gearing
  • CW and CCW pulse
  • Velocity (oscillator) mode
  • Multi-axis Si programming if used with the SiNet hub.
  • SCL "host" commands for real time control from a host PC or PLC (RS-232 or RS-485)

Q Version features include:

  • Q is a high level ASCII command set and programming language. Sequences of commands can be stored in the drive to provide complex motion and machine control.
  • Flow controls, Motion, I/O, Math functions, Registration manipulation, Multi-tasking, Host iterrogation, Exception handling (faults &interrupts).
  • Q drives also support these functions, which can be changed "on the fly" from a host command or within a Q program:
  • Pulse & direction with electronic gearing, Encoder folling with electronic gearing, CW & CCW pulse, analog or digital velocity (oscillator & joystick) mode. Analog positioning.
  • Options: Encoder feedback, RS-483 communication

Si Version features include:

  • Stand-alone operation
  • Si Programmer Windows Software with integrated configuration (software & programming cable included).
  • Graphical point and click format.
  • Combines motion, I/O, exception handling and operator interface functionality for simple machine sequencing.
  • Easily intregrates with other devices on the machine (Sensors, PLCs etc).

 The ST10-IP-EN incorporates EtherNet/IP network communications, the widely used industrial protocol for manufacturing automation applications. With EtherNet/IP users can control, configure and query the drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 MBits/sec. The ST-IP drives run all of the same control modes as ST-Q drives, with the addition that all drive features can be accessed over EtherNet/IP, including more than 100 commands and 130 registers for controlling motion, I/O, configuration, polling, math, register manipulation, and Q programming.

For connecting to external devices such as control signals, incremental encoders, limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the drive comes with 8 digital inputs, 4 digital outputs, and 2 single-ended analog inputs (analog inputs can be wired together as 1 differential analog input). Adjustable digital filters are present on the digital inputs for enhanced reliability in noisy environments.

In addition to EtherNet/IP the drive supports Ethernet TCP and UDP protocols for sending commands from Applied Motion’s proprietary Serial Command Language (SCL). The same 10/100 Mbit Ethernet port on the drive is also used for configuring and programming the drive using the ST Configurator™ Ethernet and Q Programmer™ software applications, respectively.

Product Availability:
In Stock: Ships in 1-2 Days
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Microstep Driver with Indexer

  • Current Output 0.5 to 10.0 A
  • 24-80VDC Input <
  • ConfiguratorTM configuration software
  • Configurable Idle Current reduction
  • Electronic Dampening
  • Torque Ripple Smooth
  • Command Signal Smooth
  • Host command via RS232/485
  • Anti-Resonance
  • Idle torque reduction
  • EtherNet/IP Compatible

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
S Model, Microstep Driver, RS-232
ST10-S
 385.00  385.00  377.00
Microstep Driver with ASCII Programming
ST10-C-CE
 648.00  648.00  634.00
Microstep Driver with ASCII Programming
ST10-C-CN
 599.00  599.00  587.00
Microstep Driver with ASCII Programming
ST10-IP-EE
 674.00  674.00  660.00
Microstep Driver with ASCII Programming
ST10-IP-EN
 626.00  626.00  613.00
Microstep Driver with ASCII Programming
ST10-Plus
 418.00  418.00  409.00
Microstep Driver with ASCII Programming
ST10-Q-EE
 690.00  690.00  675.00
Microstep Driver with ASCII Programming
ST10-Q-EN
 627.00  627.00  615.00
Q Model, Microstep Driver with ASCII Programming, RS-232, Encoder Feedback
ST10-Q-NE
 551.00  551.00  539.00
Q Model, Microstep Driver with ASCII Programming, RS-232, No Encoder Feedback
ST10-Q-NN
 489.00  489.00  479.00
Q Model, Microstep Driver with ASCII Programming, RS-232, RS-485, Encoder Feedback
ST10-Q-RE
 655.00  655.00  642.00
Q Model, Microstep Driver with ASCII Programming, RS-232, RS-485, No Encoder Feedback
ST10-Q-RN
 598.00  598.00  586.00
Si Model, Microstep Driver with Graphical Programming, RS-232, Encoder Feedback
ST10-Si-NE
 598.00  598.00  586.00
Si Model, Microstep Driver with Graphical Programming, RS-232, No Encoder Feedback
ST10-Si-NN
 551.00  551.00  539.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
User Manual
Download Size: 3,670.14 kb
Spec Sheet
Download Size: 4,841.25 kb
 External Links to Downloadable Files:
-Complete Catalog
http://www.applied-motion.com/sites/default/files/pdf/2008_Catalog.pdf

"Cool stuff Warren, it seems to be working, I am not getting the compile error anymore. Thanks very much for your..."

-Lloyd T., TTC

Add Your Comment  |  Read More Comments

"You had better delivery"

-Charlie G., Standard Electric

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism