PRODUCTS STEALS & DEALS TEXTBOOKS & VIDEOS TECHNICAL SUPPORT CUSTOMER SERVICE NEWS
Other Products
Model 8322S003 New Partnumber 8222S003 - Brush Mini Motor/Encoders, Economical
Model 8322S003 New Partnumber 8222S003
Brush Mini Motor/Encoders, Economical
Pittman
From: $198.00/ea
Model DZSANTU-020B200 - EtherCAT Input Digital Sinusoidal Brushless Servo Amplifiers
Model DZSANTU-020B200
EtherCAT Input Digital Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $395.00/ea
Model DPRANIR-060A800 -RESOLVER FEEDBACK - Digital Input Sinusoidal Brushless Servo Amplifiers
Model DPRANIR-060A800 -RESOLVER FEEDBACK
Digital Input Sinusoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $2,847.00/ea

AMP-205x0 Series

Power Supplies & Accessories for Servo Amplifiers

2 and 4 Axis Brush/Brushless Servo Amplifiers for DMC-21x3

AMP-205x0 Series - Power Supplies & Accessories for Servo Amplifiers
from $595.00/ea

Galil's family of interconnect cards mount directly to the DMC-21x3 Ethernet motion controllers eliminating the need for a cable which reduces overall costs for OEMs. Interconnect cards are available for extending I/O and adding multi-axis amplifiers to the DMC-21x3 controller.

Several plug-in, multi-axis amplfier boards are available for the DMC-21x3 controller. These include the SDM-20242 for driving four stepper motors in full, half, 1/4, or 1/16 step mode, the SDM-20640 for driving four stepper motors in the microstepping mode, the AMP-20341 for driving four brush-type servo motors up to 20 Watts, the AMP-20440 for driving four brush-type servos up to 200 Watts, and the AMP-20540 for driving four brushless or brush servos up to 500 Watts. Each of these four-axis amplifier boards attach directly to the 96-pin connector of the DMC-21x3 eliminating the cabling normally associated with interfacing a multi-axis controller to separate single-axis drives.

If the designer elects to use external amplifiers, the ICM-20100 makes interconnection easy as it provides d-sub connectors for each axis. The ICM-20105 provides optically isolated I/O in addition to d-sub connectors.The ICM-20100 and ICM-20105 are just 4.25" x 3.70" and attach directly to the DMC-21x3 96-pin connector.

The DB-28040 provides 40 additional digital I/O and eight analog inputs and attaches to the 50-pin header of the DMC-21x3 . The DB-28040 is just 2.55" x 3.08" and does not interfere with the SDM, AMP or ICM mounting. (Consult Galil if you wish to use the SDM-206x0 or AMP-205x0 drives with the DB-28040).

Product Availability:
Custom Order: Ships in 1-2 Weeks
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Power Supplies & Accessories for Servo Amplifiers

  • Interconnect modules connect directly to DMC-21x3 eliminating the need for a cable
  • ICM-20100 provides D-sub connectors for cost-effective connection to external drives
  • ICM-20105 provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs
  • SDM-20242 contains four small drives for stepper motors operating in full, half, 1/4, 1/16 step mode
  • SDM-20640 contains four drives for stepper motors operating in microstepping mode; SDM-20620 contains two microstep drives
  • AMP-20341 contains four small 20W linear drives for driving small brush-type servo motors
  • AMP-20440 contains four 200W PWM drives for driving brush-type servo motors; AMP-20420 contains two 200W PWM drives.
  • AMP-20540 contains four 500W PWM drives for driving brushless or brush-type servo motors; AMP-20520 contains two 500W PWM drives
  • AMP-20542 contains four PWM drives for driving brushless or brush-type servo motors (3Amps Continuous, 5Amps peak at 18-60VDC). Software selectable for low inductance motors (chopper mode).
  • DB-28040 provides 40 additional digital I/O and eight analog inputs
  • DB-28104 provides sinusoidal interpolation for Sin/Cos encoders
  • Custom interconnect solutions are available

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
ICM with two 500W servo drives
AMP-20520
 595.00  595.00  573.00
ICM with four 500W servo drives
AMP-20440
 795.00  795.00  765.00
160 V option for AMP-205x0 (adder)
AMP-205x0-160V
 100.00  100.00  90.00
modification for DB-28040 install
AMP-205x0-DB28040 option
 50.00  50.00  47.00
15-pin D to discrete wires-1 meter
CABLE-15-1m (for AMP-205x0)
 25.00  25.00  23.00
15-pin D to discrete wires-2 meter
CABLE-15-2m (for AMP-205x0)
 30.00  30.00  28.00
44-pin D to discrete wires-1 meter
CABLE-44-1m (for AMP-205x0)
 35.00  35.00  33.00
44-pin D to discrete wires-2 meter
CABLE-44-2m (for AMP-205x0)
 40.00  40.00  37.00
shunt regulator for AMP-205x0
SR-19900 (for AMP-205x0)
 75.00  75.00  70.00
Solid State Relay option
SSR Option
 75.00  75.00  70.00
 

Select items to add to your shopping cart.

* Call for special quantity pricing.

 
 Links to Downloadable Files:
 External Links to Downloadable Files:
-Application Notes
http://www.galilmc.com/download/application-note/note5474.pdf
-User Manual
http://www.galilmc.com/support/manuals/21x3_accessories.pdf
-Bulletin Board
http://www.galilmc.com/forum
-Application Notes
http://www.galilmc.com/learn/application-notes

"Thanks Kaye. I appreciate the help. As a company that builds custom automation we are constantly coming up against..."

-Scott S., ATS

Add Your Comment  |  Read More Comments

"The AMP system is working wonderfully. It's an excellent product. Very straight forward to setup and program and very..."

-Trevor J., Image Point

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism