The DMC-300xx Series is Galil's latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. The DMC-300xx is available as a compact card-level or box-level unit and connects to a stepper or servo motor amplifier of any power range. Or, the DMC-300xx can be purchased with an internal 800-Watt brushless sine drive which minimizes space, cost and wiring.The motion controller operates stand-alone or can be networked to a PC via Ethernet.
Features of Ethernet/RS232 Stand-Alone Motion Controllers
Single-axis motion controller with optional motor drive in compact enclosure
Optional, on-board 800 W brushless sinusoidal servo amplifier; 10 A cont.,15 A peak at 20-80 VDC
Motion controller available as card-level or box-level unit which can connect to stepper or servo amplifier of any power range
Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
Encoder feedback up to 15 MHz. Quadrature standard; SSI and BiSS encoder option. Main and auxiliary encoder inputs
Non-volatile memory for programs, variables and arrays
Concurrent execution of four programs
Optically isolated forward and reverse limit inputs and homing input 8 uncommitted, isolated inputs and 4 isolated outputs
High speed position latch and output compare
2 uncommitted analog inputs and 1 uncommitted analog output
Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input.(Option for 20-80 VDC)
DMC-30010/DMC-30011 Card: 3.0" x 4.0" DMC-30010/DMC-30011 Box: 3.9" x 4.2" x 1.4" DMC-30012-Box (with drive): 3.9" x 5.0" x 1.5"