Other Products
Model I2384124NC - NEMA Frame Brushless Servo Motor/Encoders
Model I2384124NC
NEMA Frame Brushless Servo Motor/Encoders
MCG Inc.
From: $422.00/ea
Model B40A40AC - Analog Input Trapezoidal Brushless Servo Amplifiers
Model B40A40AC
Analog Input Trapezoidal Brushless Servo Amplifiers
Advanced Motion Controls
From: $995.00/ea
MMI-01 - Operator Interfaces
Operator Interfaces
Applied Motion Products, Inc.
From: $570.00/ea

PFC35TH Series

Tin-Can Stepper Motors

35mm diameter, 7.5 degree/step, 33 mNm Holding Torque

PFC35TH Series - Tin-Can Stepper Motors
from $0.01/ea

The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core.   Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse signal.

Because of its high torque output and low profile construction, applications for tin-can stepper motors include, but are not limited to, printing, packaging, and medical devices.

Partnumber Configurator:

Example partnumber  PF(C)42T-48C1G (1/50)

PF(C) = Series Designation
PF: Flying lead joint
PFC: Connector joint
C = Coil Rating
B: 24V Unipolar
C: 12V Unipolar
D: 5V Unipolar
P: 12V Bipolar
Q: 5V Bipolar
R: 12V Bipolar (PF35T only)
42 = Outer Diameter in mm 1 =  Magnetic Material
1-Ferrite Anisotropic
3-Ferrite Isotropic
T = Type
Blank: Standard
T: Thin Stack
H: High Torque
G = Gear Head
Blank: No gear head
G: Gear head
48 = Steps per Revolution
1/50 = Gear head ratio
with geared models only

**Note:  a 5pc minimum order requirement applies to these Linear Stepper Motors**

Product Availability:
Custom Order: Ships in 3-5 Weeks
(Expedited Airfreight Option Available For Sooner Delivery)

Features of Tin-Can Stepper Motors

  • Offered in diameters of 20mm, 25mm, 35mm, 42mm and 55mm 
  • Unipolar or bipolar windings with a variety of useable voltages
  • 5V, 12V and 5V coil ratings
  • 24 or 48 or 96 steps per revolution
  • Forces between 8 mNm and 180 mNm
  • Step angles of 3.75°,  7.5° and 15°
  • High torque, yet cost effective

Name/Description 1-4 (US$) 5-9 (US$) 10-24 (US$)
Tin-Can Stepper Motor
PFC35TH (min. order: 5 pcs)
*0.01 *call *call

Select items to add to your shopping cart.

* Call for special quantity pricing.

There are no listed accessories for this product at this time.
 Links to Downloadable Files:
 External Links to Downloadable Files:
-Spec Sheet
-Stepper Catalog
-Gearhead Specs

" Dear Mr. Warren Osak; I write this mail to thank you for your Help to make this purchase possible and..."

-Hani Baset

Add Your Comment  |  Read More Comments

"It took me quite a while to solve this problem (using your recommendations). Anyway, so far so good, and thank you..."

-BJ S., Hinze Auto.

Add Your Comment  |  Read More Comments

SERVO2GO is a Proud Sponsor of Geneva Centre for Autism