PFC55H Series
Tin-Can Stepper Motors
55mm diameter, 7.5 degree/step, 150-180 mNm Holding Torque
![]() |
The PF/PFC series tin-can stepping motors are conventional magnet-driven rotary stepper motors with a permanent magnet in their rotor core. Rotating in proportion to the number of pulses sent to the motor, the stepper motor is frequency synchronized and can change speed depending on the frequency of the pulse signal.
Because of its high torque output and low profile construction, applications for tin-can stepper motors include, but are not limited to, printing, packaging, and medical devices.
Partnumber Configurator:
Example partnumber PF(C)42T-48C1G (1/50)
PF(C) = Series Designation PF: Flying lead joint PFC: Connector joint |
C = Coil Rating B: 24V Unipolar C: 12V Unipolar D: 5V Unipolar P: 12V Bipolar Q: 5V Bipolar R: 12V Bipolar (PF35T only) |
42 = Outer Diameter in mm | 1 = Magnetic Material 1-Ferrite Anisotropic 3-Ferrite Isotropic 4-Neodymium |
T = Type Blank: Standard T: Thin Stack H: High Torque |
G = Gear Head Blank: No gear head G: Gear head |
48 = Steps per Revolution 24-15°/step 48-7.5°/step 96-3.75°/step |
1/50 = Gear head ratio with geared models only |
**Note: a 5pc minimum order requirement applies to these Linear Stepper Motors**
Features of Tin-Can Stepper Motors
|