STM23Q-2EN

STM23Q-2EN

SKU
315262
  • Buy 5 for $430.00 each and save 3%
  • Buy 10 for $434.00 each and save 2%
$443.00

For bulk orders request a quote 

Product Details

The STM23Q-2EN integrated stepper is a drive+motor unit, fusing a NEMA 23 step motor and a sophisticated 5.0 A/phase (peak-of-sine) stepper drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.

The STM23Q-2EN integrated stepper can operate in all of the same control modes as the S option, plus the ability to run a Q program stored in non-volatile memory. Q programs are created using Applied Motion’s Q Programmer™ software, which provides powerful commands for motion, I/O, conditional processing, multi-tasking, math functions, and more.

The STM23Q is setup and configured using Applied Motion’s ST Configurator™ software.

Each STM23Q integrated stepper comes with 3 digital inputs, 1 digital output, and 1 analog input. The digital inputs accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types. The digital output can be connected to PLC inputs, counters, lights, relays, or other devices. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.

The STM23Q-2EN comes with an Ethernet port for configuration, programming and communications. The Ethernet port is fast 10/100 Mbit, and the drive supports both TCP and UDP communication protocols.

All STM23Q models are CE approved and RoHS compliant.

Features

Metric Toggle
More Information
Manufacturer Applied Motion Products
Short Description Drive + Motor + Control Unit (Ethernet)
Communications Ethernet
Max Holding Torque (mNm) 883
Max Holding Torque oz (in) 125
Max Length (mm) 93.1
Min Operating Temperature (°C) 0
Min Operating Temperature (°F) 32
Max Operating Temperature (°C) 85
Max Operating Temperature (°F) 185
Max Shaft Diameter (mm) 6.35
Max Shaft Diameter (in) 0.25
Min Input Supply Voltage (VDC) 12
Max Input Supply Voltage (VDC) 70
Motor Construction Hybrid Stepper
Motor Shape Square Body
NEMA Frame Size 23
Number of Axes (Motors) 1
Operating Mode Analog Positioning, Encoder Following, Q Programming, Streaming Commands, Modbus TCP
Rotor Inertia (kg-m-s²) 2.60E-05
Rotor Inertia (oz-in-s²) 3.68E-03
Series STM Series,vendor=Applied Motion Products Inc.
Setup Software Setup
Shaft Orientation In-line,Single-nded
Step Angle (°) 1.8
Product Category Integrated Motors
Drive + Motor + Control Unit (Ethernet)

Sample image only. Product may differ

Product Availability
Usually in Stock: Ships in 5-7 Days. Expedited Delivery Available. Please Inquire.