STM23S-3RN

STM23S-3RN

SKU
308498
  • Buy 5 for $341.00 each and save 3%
  • Buy 10 for $344.00 each and save 2%
$351.00

For bulk orders request a quote 

Product Details

The STM23S-3RN integrated stepper is a drive+motor unit, fusing a NEMA 23 step motor and a sophisticated 5.0 A/phase (peak-of-sine) stepper drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.

The STM23S-3RN integrated stepper can operate in the following control modes: step (pulse) & direction, velocity (oscillator), streaming serial commands (SCL), and operation with an Applied Motion 4-axis or 8-axis SiNet Hub.

All STM23 units are setup and configured using Applied Motion’s ST Configurator™ software.

Each STM23 integrated stepper comes with 3 digital inputs, 1 digital output, and 1 analog input. The digital inputs accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types. The digital output can be connected to PLC inputs, counters, lights, relays, or other devices. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.

The STM23S-3RN comes with an RS-485 port for programming and serial communications.

Features

Metric Toggle
More Information
Manufacturer Applied Motion Products
Short Description Drive + Motor + Control Unit (RS-485)
Communications RS-485
Max Holding Torque (mNm) 1483
Max Holding Torque oz (in) 210
Max Length (mm) 114
Min Operating Temperature (°C) 0
Min Operating Temperature (°F) 32
Max Operating Temperature (°C) 85
Max Operating Temperature (°F) 185
Min Input Supply Voltage (VDC) 12
Max Input Supply Voltage (VDC) 70
Motor Construction Hybrid Stepper
Motor Shape Square Body
NEMA Frame Size 23
Number of Axes (Motors) 1
Operating Mode Streaming Commands, Step & Direction, Velocity (Oscillator)
Rotor Inertia (kg-m-s²) 4.60E-05
Rotor Inertia (oz-in-s²) 6.51E-03
Series STM Series,vendor=Applied Motion Products Inc.
Setup Software Setup
Shaft Orientation In-line,Single-nded
Step Angle (°) 1.8
Product Category Integrated Motors
Drive + Motor + Control Unit (RS-485)

Sample image only. Product may differ

Product Availability
Usually in Stock: Ships in 5-7 Days. Expedited Delivery Available. Please Inquire.