- Buy 5 for $114.00 each and save 3%
- Buy 10 for $115.00 each and save 2%
The STR8 stepper drive is a compact, powerful, digital step & direction drive, great for OEM applications requiring basic step & direction control of a 2-phase step motor.
The STR8 outputs up to 8 A/phase to the step motor, and is compatible with a variety of 2-phase step motors that have been selected to optimize performance of both the drive and motor.
The STR8 drive features advanced microstepping performance and sophisticated current control with anti-resonance. Anti-resonance electronically damps motor and system resonances, which improves motor smoothness and torque over a wide speed range.
Each STR8 step motor drive operates in either Step & Direction or Pulse/Pulse control mode. Selecting between these two modes is done by moving a jumper located under the cover of the drive.
Each STR8 drive can microstep up to 20,000 steps/rev with a 1.8º step motor (1/100 step), and can even microstep the step motor when the command pulses are low resolution. This feature is called Microstep Emulation.
All drive setup is done via dip switches and a rotary switch on the side of the drive, including motor selection, running current, idle current, and step resolution.
|Manufacturer||Applied Motion Products|
|Short Description||24-75 VDC Input, 2.35-8.0 A Output Range|
|Operating Mode||Step & Direction|
|Number of Axes (Motors)||1|
|Min Input Supply Voltage (VDC)||24|
|Max Input Supply Voltage (VDC)||75|
|Max Continuous Output Current (A)||8|
|Max Peak Output Current (A)||8|
|Min Operating Temperature (°C)||0|
|Max Operating Temperature (°C)||70|
|Min Operating Temperature (°F)||32|
|Max Operating Temperature (°F)||158|
|Min Continuous Output Current (A)||2.35|
|Min Peak Output Current (A)||2.35|
|Series||STR Series,vendor=Applied Motion Products Inc.|
|Setup||DIP and rotary switches|
|Product Category||Microstep Drivers|
Sample image only. Product may differ